ENGINE
IVECO CURSOR 10 Euro 5 mounted longitudinally at rear VGT Turbocharged (air-air) with intercooler, water cooled Electronically-controlled injection pump 6 cylinders in line, 4 valves by cylinder
Decompression engine brake
| Total displacement | 10 308 cm³ |
| Max. power output | 280 kW(380Hp) |
| Max. torque | 1600 Nm |
Reinforced urea reheat Cruise control integrated with speed limiter Double cartridge fuel filter. Fuel pre-filter with water separator Large capacity air filter with blockage warning
Optional*: Engine powered 330 kW (450Hp) / 2100 Nm EEV exhaust emission standard
GENERAL FEATURES
| Length | 12 200 mm | 12 765 mm | |
| Width | 2 550 mm | ||
| Max height (with A/C) | 3 620 mm | ||
| Wheelbase | 6 321 mm | 6 886 mm | |
| Front / rear overhang | 2 619 mm | 3 260 mm | |
| Interior height | 2 100 mm | ||
| Floor Height | 1 380 mm | ||
| Height of the 1st step Front/rear door | 343 mm | 347 mm | |
| Width of front/central door | 830 mm | 770 mm | |
| Approach/ Departure angle | 8° / 8° | ||
| Curb to curb turning radius | 9 250 mm | 10 000 mm | |
| Wall to wall turning radius | 11 025 mm | 11 625 mm | |
| Front / Rear axle max weight | 7 100 kg | 12 600 kg* | |
| G.V.W.* | 19 000 kg* | ||
| Volume of inner luggage racks | 1,25 m³ | 1.31 m³ | |
| Volume lockers with WC and without berth (without WC +1m³) | 9.5 m³ | 10.8 m³ | |
* depends on local regulation and options
TRANSMISSION
Mechanic gearbox ZF 6S 1600 Exterior warning buzzer with the shift of reverse speed
Optional*: Gearbox robotized ZF As-Tronic Hillholder (with AS-Tronic only)
AXLES
FRONT AXLE / STEERING
Independent front wheel-axle ZF 8098 Direction
REAR AXLE
Rear axle with a simple central reduction, ratio 3,36; maximum speed 156 km/h