|
GENERAL FEATURES |
|||||
| Chassis Length | 10 020 mm | ||||
| Chassis Width | 2 498 mm | ||||
| Chassis Wheelbase | 3 000 / 1 450 mm | ||||
| Front / Rear chassis overhang | 2 640 / 2 930 mm | ||||
| Overhang angles | > 7° | ||||
| Bodied Wheelbase | 13 200 – 15 000 mm | ||||
| Bodied Length | 2 500 – 2 550 mm | ||||
| Bodied Width | 2 500 – 2 550 mm | ||||
| Bodied floor Height | 780 – 1 600 mm | ||||
| Max Slope | > 18° | ||||
| Max Technical GVW | 24 500 Kg | ||||
| On front axle | 7 100 Kg | ||||
| On rear axle | 12 600 / 5 500 Kg | ||||
|
|
|
||||
| 280 kW (380 HP) 330KW (450 HP) |
EURO5 | ||||
ENGINE
Type IVECO CURSOR 10 mounted longitudinally at rear VGT Turbocharged (air-air) with intercooler, water cooled, 4 stroke Diesel cycle
Electronically-controlled injection pump 6 cylinders in line,4 valves by cylinder Decompression engine brake
- Electronically-controlled injection pump
- 6 cylinders in line,4 valves by cylinder
- Decompression engine brake
- Bore X Stroke 125 x 140 mm
- Total Displacement 10 308 cm³
- Max. power output 280 kW (380 Hp)
- Max. torque 1.600 Nm – 1.000 rpm
- Measured in accordance to standard 88/195/EC
- Gassy emissions comply with Euro 5 Standards
- CE 88/77*2005/55*2006/51/CE)
Radiator and fan located on the rear overhang on the left-hand side in a longitudinal position; hydrostatic operation
Speed limiter & Cruise control
Air compressor connected to the engine by means of a shaft driven by a gear set.
Hydraulic steering with rotating balls and hydraulic steering booster
Fuel filter & pre-filter with manual pump and water separator
Large capacity air filter with blockage warning
Manual start and cut-out in engine compartment
Optional: Engine power 330 KW (450 Hp) – 2100 Nm
GEARBOX
Automated ZF AsTronic 12 (for 450Hp version only)
| 1st | 12.53 | 7th | 2.70 |
| 2nd | 9.59 | 8th | 2.10 |
| 3rd | 7.43 | 9th | 1.63 |
| 4rd | 5.78 | 10th | 1.26 |
| 5rd | 4.56 | 11th | 1.00 |
| 6rd | 3.55 | 12th | 0.78 |
| Reverse | 11.41 | ||
Automatic Voith D864.5 (for 380Hp version only)
| 1st | 4.9:1 | 3th | 1.00:1 |
| 2st | 1.36:1 | 4th | 0.73:1 |
| Reverse | 4.1:1 | ||
AXLES
FRONT AXLE
- Independent Front Wheels ZF RL75E designed for air suspension
REAR AXLE
- Single reduction stress-bearing axle, MC13-175.
- Rigid IVECO 5876 with driven wheels
| ZF 6S-1600 | ZF AsTronic | VOITH D864.5 | |
| Std ratio | 3.21 | 3.42 | 4.89 |
| OPT ratio | 3.07 – 3.42 | 3.21 – 3.73 | 4.56 – 5.12 |