|
GENERAL FEATURES |
|||||
|
Chassis Length |
6 215 mm |
7 040 mm |
7 900 mm |
||
|
Chassis Width |
2 161 mm |
2 161 mm |
2 161 mm |
||
|
Chassis Wheelbase |
3 750 mm |
4 350 mm |
4 750mm |
||
|
Front Chassis Overhang for stripped chassis |
800 mm |
800 mm |
800 mm |
||
|
Front Chassis Overhang for completed chassis |
998 mm |
998 mm |
998 mm |
||
|
Rear Chassis Overhang |
1 655 mm |
1 890 mm |
2 350 mm |
||
|
Front Track Width |
1 725 mm |
1 725 mm |
1 725 mm |
||
|
Rear Track Width |
1 661 mm |
1 661 mm |
1 661 mm |
||
|
Turning circle |
13 180 mm |
15 020 mm |
16 240mm |
||
|
Max. Technical GVW |
|||||
|
Total |
6 500 kg |
6 500 kg |
6 500 kg |
||
|
Total ( with Retarder) |
6 700 kg |
6 700 kg |
6 700 kg |
||
|
Front (max. technically permitted) |
2 300 kg |
2 300 kg |
2 300 kg |
||
|
Rear (max. technically permitted) |
5 000 kg |
5 000 kg |
5 000 kg |
||
|
|
|
125 kW (170 HP) |
EEV |
||
ENGINE
IVECO F1C EEV
- Diesel 4 cylinders in line,
- EGR system, double stage turbo
- Total displacement 2998 cc
- Common Rail High Pressure Direct Injection.
- EDC Engine control system
- Maximum power 125 kW (170 HP) at 2.990 – 3.500 rpm
- Maximum torque 400 Nm at 1.250 ÷ 3.000 rpm
Wastegate valve
GEARBOX
Gearbox ZF 6S 400
| 1st | 1: 5.373 | 4th | 1: 1.365 |
| 2nd | 1: 3.154 | 5th | 1: 1.000 |
| 3rd | 1: 2.041 | 6th | 1: 0.791 |
| Reverse | 1: 4.838 |
- Car type pattern shift
- Noiseless teeth contact
- Aluminium housing
- Push-pull cable control
- Synchronized RV
- RV close to the first gear
- Reduced influence of oil viscosity at low temperature
Automatic Gear box with electronic control Agile 6 speed gearbox ZF 6AS 400
| 1st | 1: .373 |
4th | 1: 1.365 | |
| 2nd | 1: 3.154 | 5th | 1: 1.000 | |
| 3rd | 1: 2.041 | 6th | 1: 0.791 | |
| Reverse | 1: 4.838 | |||
- EGS (Electronic control unit)
- Possibility to drive in fully automatic or sequential mode
- Clutch actuator (Electric controlled clutch operations automatic clutch re-adjustment)
- Gear change actuator (Integrated shift and selection sensors)
AXLES
FRONT AXLE
- Type Independent wheels with indication 5823
- Steering angle (ext.) 38°30’
- Steering angle (int.) 42°30’
- Maximum Load capacity 2 300kg
- Reinforced torsion bar suspension
- Disc Diameter 306 mm
REAR AXLE
- Type Rigid; Identification 450517/2
- Single axle – Twin Wheel
- Axle housing material Steel
- Maximum load capacity 5 000kg
- Full-floating single reduction
- Disc diameter: 306 mm
- Differential lock available