ENGINE
IVECO TECTOR 6 EEV. 6 cylinders in line, vertical transverse at the rear
| Total displacement | 5.9 litres |
| Max. power output | 220 kW (300 hp) at1850 rpmn |
| Max. torque | 1100 Nm |
EEV emissions
– – Exhaust pipe on bottom or on roof
– Fire detection of engine compartment
GENERATOR
– Permanent magnet brushless generator, bolted to the Tector engine
– Starts the Tector engine (without starter, without fly wheel)
– Power 140 kW
– Water cooled with radiator and electric fans on the roof
ELECTRIC MOTOR
– Serial Hybrid, without gearbox, without angle drive
– Brushless asynchronous traction motor
– Water cooled with radiator and electric fans on the roof
– Integrated reduction 4:1
– Power : continuous 120 kW, peak 175 kW
– Torque : transitory 2360 Nm, peak 3300 Nm
– Integrated ASR and retarder functions
TRACTION BATTERIES
– Batteries Lithium-ion Nano-Phosphate for braking energy recovery
– Recharged by the electric motor in deceleration mode
– Power the electric motor in the acceleration mode
– 11 kWh stored, 635 V, 200 kW
– Installation on the roof, integrated ambient air cooling
GENERAL FEATURES
| Length | 11 990 mm | ||
| Width | 2 500 mm | ||
| Height | 3 391 mm | ||
| Wheelbase | 6 120 mm | ||
| Front / rear overhang | 2 710 mm | 3 160 mm | |
| Front/ Rear Track | 2 087 mm | 1 869 mm | |
| Front/ rear internal height (2 doors) | 2 344 mm | 2 115 mm | |
| Front/ rear internal height (3 doors) | 2 344 mm | 2 309 mm | |
| Front/ Middle/ Rear door access height | 320 / 330 / 330 mm | ||
| Front/ Middle/ Rear door width | 1 200 mm | ||
| Wall to wall turning radius | 10 785 mm | ||
| Kerb-to-kerb turning radius | 9 000 mm | ||
| Approach / Departure angles | 7°/7° | ||
| G.V.W.* | 18 000 kg* | ||
| Max. Front axle load | 7 245 kg | ||
| Max. Rear axle load | 11 500 kg | ||
* depends on local regulation and options
TRANSMISSION
– Automatic gearbox ZF (with / without Topodyn) or VOITH (with / without Sensotop)
– 3 or 6 touch gearbox selector
AXLES
FRONT AXLE / STEERING
Independent wheels front axle IR75.
– Worm-type steering ZF type 8098 with integrated power steering
REAR AXLE
– Inverse double reduction rear axle ZF AV132 (or equivalent)
– Standard axle ratio 18 x 35