ENGINE
IVECO CURSOR 8 EURO 5 (SCR system). Diesel 6 cylinders in line, direct injection, vertical position
- Maximum power 243 kW (330 HP) at 2 050 rpm
- Maximum torque 1 500 Nm (153mkg) at 1 125-1 800 rpm
- Engine capacity 7.8 litres
- Supercharged by variable geometry turbo compressor with cooling of the inlet air by air-air intercooler
- Electronic regulation and pump injectors
- Oil heat exchanger (7,6 dm2)
- Cold start by means of a resistor integrated into the induction manifold
- Electric accelerator
- EURO 5 exhaust emission standard
Optional*:
- IVECO CURSOR 8 EURO 5 (SCR system)
- Maximum power 280 kW (380 HP) at 2 050 rpm
- EEV exhaust emission standard
GENERAL FEATURES
| Length | 11 991 mm | 12 756 mm | |
| Width | 2 550 mm | ||
| Height with / without A/C | 3 455/3300 mm | ||
| Wheelbase | 6 200 mm | 6 965 mm | |
| Front / rear overhang | 2 063 mm | 3 292 mm | |
| Front / rear tracking | 2 068 mm | 1 814 mm | |
| Interior height clearance in the corridor | 2 275 mm | ||
| Floor height | 860 mm | ||
| Access height of front / centre doors | 344 / 344 mm | ||
| Wall to wall turning radius | 11 050 mm | 11 650 mm | |
| Kerb-to-kerb turning radius | 9 400 mm | 10 150 mm | |
| Width of front / centre door* | 800 / 800 mm | ||
| Angle of attack / escape | 8.9°/8° | ||
| Maximum permitted weight on rear axle* | 11 500 kg | ||
| Maximum permitted weight on front axle | 7 100 kg | ||
| G.V.W.* | 18 000 kg* | ||
| Capacity of the interior luggage compartment | 2.2 m³ | 2.4 m³ | |
| Capacity of the luggage compartment u the floor | 5.8 m³ | 6.8 m³ | |
* depends on local regulation and options
GEARBOX
- 6 speed mechanical gearbox ZF
- Exterior warning buzzer with the shift of reverse speed
Optional*:
- Automatic 4 speed VOITH D864.5
- Automatic 6 speed ZF 6 HP
- Automated 12 speed ZF AsTronic (380 HP only)
AXLES
FRONT AXLE / STEERING
- Front axle with independent wheels suspension
- Exterior warning buzzer with the shift of reverse speed
Optional*:
- Automatic 4 speed VOITH D864.5
- Automatic 6 speed ZF 6 HP
- Automated 12 speed ZF AsTronic (380 HP only)
DRIVE AXLE
- Standard axle ratio 3,36 maximum speed: 118 km/h
- Optional*:Other ratios available (please contact us)